Hardwood
Engineered hardwood
Luxury vinyl plank
Laminate
Porcelain tile
Carpet
Shaw
Mohawk
COREtec
PergoFree in-home measure and written estimate: Shaw, Mohawk, COREtec and Pergo lines compared on your own rooms, with carpet, tile, vinyl plank, laminate and hardwood laid out side by side
Get your free estimateStyles & brands we work with
- Hardwood
- Engineered hardwood
- Luxury vinyl plank
- Laminate
- Porcelain tile
- Carpet
- Shaw
- Mohawk
- COREtec
- Pergo
See the difference
Before
After
Before
After
Before
AfterHow Much Does Hardwood Floor Refinishing Cost in Whitney?
Hardwood floor refinishing in Whitney typically costs $1,800 – $5,000 for a 500 to 800 square foot project, and that’s the installed, finished price for sanding and recoating an existing wood floor. Lighter work like sanding and applying one fresh coat at the low end, a full sand-to-bare-wood with stain and finish at the high end. Refinishing keeps the floor you already have instead of paying for new material, which is why it’s usually the first question worth asking before you replace.
Your exact number depends on square footage, how worn the finish is, and whether you’re changing the color. The written estimate sets the final price, and estimates are free. Call (833) 734-5603 to book one. We answer 24/7 and fast dispatch runs 7am to 7pm, Sunday through Friday.
Key Takeaways
- Typical hardwood floor refinishing in Whitney runs $1,800 – $5,000 for a 500 to 800 square foot job.
- Per square foot, refinishing starts around $3. That’s roughly the cost of new carpet and far below laying new hardwood.
- Refinishing reuses the wood already in your home, so you skip the material bill for new boards.
- Heavier wear, color changes, and uneven boards push the price toward the top of the range.
- Our technicians have up to 14 years of experience refinishing floors.
Hardwood Floor Refinishing Cost Breakdown (2026)
Here’s how the typical Whitney range breaks down by line item. These are estimated prices for the full job, materials and labor included, not a quote.
| Work item | Typical estimated range |
|---|---|
| Sanding and surface prep (500 – 800 sq ft) | $600 – $1,200 |
| Stain application (color change or refresh) | $400 – $900 |
| Finish coats, clear or matte | $500 – $1,300 |
| Baseboards and trim detail, edges | $200 – $600 |
| Boards repaired or replaced before sanding | $250 – $1,000 |
| Full project estimate | $1,800 – $5,000 |
For a 500 to 800 square foot project, the total lands in that $1,800 – $5,000 band. A tight, even floor with a light finish that only needs a screen-and-recoat sits near the bottom. A floor with cupped boards, deep scratches, or a full color change with multiple finish coats runs toward the top. Refinishing usually costs less than laying new hardwood, which typically starts around $8 per square foot, while refinishing starts around $3 per square foot and reuses what’s already down. If the boards are too far gone to save, that’s a conversation about replacement, not refinishing, and we’ll say so at the estimate.
What Affects Hardwood Floor Refinishing Pricing in Whitney
Whitney sits in the Las Vegas Valley, where summer heat and very dry air work on wood floors in ways a coastal climate never does. Wood shrinks and swells with humidity swings, and dryness here can open small gaps between boards. That’s not a refinishing problem on its own, but it changes how much prep a floor needs before sanding. A few factors move the Whitney price up or down:
- Square footage. More floor means more sanding, more finish, and more time. A 500 square foot room prices differently than an 800 square foot open living space, and the per-square-foot cost drops as the job gets larger.
- Condition of the floor. Deep scratches, dents, or worn-through finish require more sanding passes. Floors that have been refinished before need a careful check that there’s enough wood left to sand again.
- Color change. Refinishing to a new stain color is more work than restoring the existing look. The old finish has to come fully off, and the new stain is tested on the wood to see how it takes.
- Board repairs. Warped, split, or water-damaged boards get swapped or patched before sanding. That’s the $250 – $1,500 Floor Repair line item and it’s priced per job.
- Room layout. Lots of closets, tight hallways, and furniture to move around add time. A single open room refinishes faster than several small ones.
- Acclimation and drying. Product instructions on finish and setup decide how long the floor has to settle and cure between coats. That timing depends on the product and the home, and it’s laid out in your written estimate.
How to Save on Hardwood Floor Refinishing
The biggest money saver is refinishing before the floor gets too worn. Once boards are deeply scratched or the finish has worn through in traffic areas, the job takes more sanding and more time. A screen-and-recoat while the finish is still intact can keep you near the bottom of the range. Here’s what actually helps:
- Do the whole floor, not half of it. Blending a refinish into part of a room rarely matches the untouched area. A full-room job is priced more efficiently than a partial one.
- Keep your current color if you like it. Skipping a stain change lowers labor. You get the fresh finish without the extra step of stripping and re-staining.
- Bundle repairs into the refinish. Swapping a few bad boards during the same visit costs less than a separate trip.
- Group the rooms you refinish. Combining adjacent rooms into one project spreads the setup across more square footage.
- Ask about refinish versus replace. We’ll tell you straight if the wood can be saved or if replacement is the smarter spend. Refinishing extends the life of your existing floor without full replacement costs.
The estimate itself is free, so there’s no reason to guess. Call (833) 734-5603 and we’ll give you a written number for your floor.
Refinishing vs. Replacing: Which Makes Sense in Whitney?
Refinishing almost always costs less than replacement when the wood underneath is sound. New hardwood typically starts around $8 per square foot, so a 500 to 800 square foot floor as a new install runs closer to our $4,500 – $12,000 hardwood installation range. Refinishing that same floor starts around $3 per square foot and lands in the $1,800 – $5,000 band. The catch is the wood’s condition. A floor can only be sanded so many times before the wear layer gets thin. That’s checked at the estimate visit. If the boards are cupped, water-damaged, or worn past saving, replacement is the honest recommendation. When they’re solid, refinishing is the first option we look at. This is where a specialist that focuses on floors earns its keep: we install and we refinish, so we’re not steering you toward the bigger sale.
Why a Flooring Specialist Handles This Better
Refinishing calls for reading a floor’s condition, setting the sanding depth, testing stain on the actual wood, and timing finish coats. A contractor who splits attention across roofing, painting, and remodeling isn’t doing that every day. Flooring Whitney works on floors only. One trade, done right. Our technicians have up to 14 years of experience. The finishing work is done with the same attention we bring to new installs. When you want to see your options across the rest of the home, explore our Flooring Whitney range and our local Whitney service area. Refinish first, then decide what the other rooms need.
How the Refinishing Process Usually Goes in Whitney
A typical refinishing job moves through a few clear stages. First is assessment: we check board thickness, look for loose or damaged boards, and test how the existing finish comes off. Next is prep and repair, where bad boards get swapped and small gaps are filled. Then sanding to bare wood in stages, stain if you’re changing color, and finish coats. Between stages, wood and finish need time to settle and cure, and that timing depends on the product and your home. On the day of the estimate we’ll walk you through the sequence and confirm the schedule. We don’t promise finish work in a set number of days, because how your floor responds to sanding and stain sets the pace. What we can promise is a written estimate up front and free estimates on the whole job. Call (833) 734-5603. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
FAQs – Hardwood Floor Refinishing Cost
How much does hardwood floor refinishing cost in Whitney?
Hardwood floor refinishing in Whitney typically costs $1,800 – $5,000 for a 500 to 800 square foot project, with per-square-foot pricing starting around $3. Thin wear, deep scratches, a color change, or board repairs push you toward the top of the range. Call (833) 734-5603 for an exact quote – estimates are free.
Is it cheaper to refinish or replace hardwood floors?
Refinishing is cheaper in most cases, often by a wide margin. New hardwood starts around $8 per square foot versus about $3 per square foot for refinishing, so replacement usually costs several times more. Refinishing only makes sense when the existing wood is sound, which we check at the estimate. Call (833) 734-5603 to find out which path your floor is on.
Can you refinish my floors the same day?
Same-day service starts with a visit, not a finished floor: we come out, assess, and give you a written estimate the same day you call. The actual refinishing is a booked job scheduled around your floor’s needs. Call (833) 734-5603 to start. We answer 24/7, and fast dispatch runs 7am to 7pm, Sunday through Friday.
How much does it cost to fix damaged boards before refinishing?
Board repairs typically run $250 – $1,500 per job, priced by how many boards need replacing and how they’re joined into the floor. Doing repairs during the same visit as the refinish usually costs less than scheduling them separately. Call (833) 734-5603 for an exact quote – estimates are free.
Does refinishing cost more if I want a different stain color?
Yes, a color change adds to the job. Expect the total to move toward the $5,000 end of the $1,800 – $5,000 range, because the old finish has to come fully off and the new stain tested on your wood. Restoring your current color keeps the cost lower. Call (833) 734-5603 for a written number – estimates are free.
Do you handle both refinishing and new installs?
Yes. We refinish existing hardwood and we install new floors, so you get an honest recommendation rather than a push toward the bigger job. If you’re weighing your options, our pricing across flooring services covers refinishing at $1,800 – $5,000, hardwood installation at $4,500 – $12,000, and repair at $250 – $1,500 per job. Call (833) 734-5603 to talk it through.
Contact Flooring Whitney for a Free Refinishing Estimate
Refinishing is the cheapest way to fall back in love with a wood floor you already own, and it’s worth getting a real number before you decide anything else. Tell us the square footage, snap a photo, or just describe the wear, and we’ll book an estimate. Every estimate is free, the price is set per job by the written estimate, and we stand behind the work with a satisfaction guarantee. Our technicians have up to 14 years of experience with floors, not general handyman work. Call (833) 734-5603. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Refinish before you replace, and let a flooring specialist show you what’s possible.
Pricing reflects the Whitney market as of 2026. Flooring Whitney offers free estimates – call (833) 734-5603.
What Our Customers Say
"Tile in the entry and kitchen. The grout lines are even, the tiles are level to each other, and he checked it with a long straightedge before he let it set."
- Bryce Norris"Laminate in the family room and the hallway. They left a gap along the walls and covered it with new quarter round, and the floor has not buckled or creaked."
- Shane Brooks"Our old carpet had rippled in the living room. They stretched it back flat instead of selling me new carpet, and it has stayed tight."
- Vivian Yang